The birth of Rotary Table Intelligent Assembly Machine can better solve the problem of complex, precision, small batch and multi-variety parts processing, which represents the development direction of modern machine tool control technology. The Spring Festival holiday is coming, for our machinery processing enterprises, the maintenance of Rotary Table Intelligent Assembly Machine has become particularly important, to do a good job of maintenance can make the machine processing accuracy to maintain a good state, extend the service life of the machine.

Routine maintenance and repair:

1, grounding protection system should have good continuity to ensure personal safety.

2, regular inspection of circuit breakers, contactors, single-phase or three-phase arc interrupters and other components. Such as whether the wiring is loose, whether the noise is too large, find out the cause and queue hidden dangers.

3. Ensure the normal operation of the cooling fan in the electric cabinet, otherwise it may cause damage to the vital parts.

4, the fuse is blown, the air switch frequently trips, should find out the reason in time and queue

5, servo drive battery replacement.

Weekly maintenance:

1, clean the heat exchanger air filter, cooling pump, lubricating oil pump filter.

2. Check whether the tool pull bolt is loose and whether the handle is clean.

3. Check whether the three-axis mechanical origin is offset.

4. Check whether the tool changing arm action or the tool bank cutter head rotation is smooth.

5, if there is an oil cooler to check the oil cooling oil, if below the scale line, please fill the oil cooling oil in time.

6, check the oil cooler set temperature, it is recommended to set between 26-28 degrees.

Monthly maintenance:

1, Detect X, Y, Z three-axis track lubrication, the track surface must ensure good lubrication.

2, check, clean limit switch and block.

3. Check whether the oil cup of the punching cylinder is enough, and add it in time.

4. Check whether the signage and warning nameplate on the machine are clear and exist.

Half-year maintenance:

1, disassemble the three-axis anti-chip cover, clean the three-axis tubing joint, ball guide screw, three-axis limit switch, and test whether it is normal. Check whether the hard rail scraping effect of each shaft is good.

2, check the axis of the servo motor and the head is normal operation, there is no abnormal sound.

3, replace the oil pressure unit oil, tool store deceleration mechanism oil.

4, test the shaft clearance, if necessary, can adjust the compensation amount.

5, clean the dust in the electric box (ensure that the machine is turned off).

6. Comprehensively check whether the contacts, connectors, sockets and switches are normal.

7, check and adjust the mechanical level.

Rotary Table Intelligent Assembly Machine https://www.zjshuangzheng.com/Rotary-Table-Intelligent-Assembly-Machine.html