To start configuring the device, first, enter 192.168.10.1 as the IP address, and you can easily access it through your web browser. You just need to type the IP address in the address field for the Wavlink extender login through its portal. Although most of the time IP addresses vary from the manufacturer's end. Most of the time they are the same or very close. These are some of the more popular manufacturers and the IP addresses of your Wavlink devices- 192.168.10.1. These IPs are present on the manuals or the back of the router. You can look up it easily on the website of the manufacturer. Though, sometimes it is normal. As the given router's address doesn't work for you. Therefore, at that time you can simply reset your device to its default state. Just locate the reset button by turning the device on with this one button. Make sure to hold the pin and press the button. While you perform this step you will notice that all the old settings will wash off the settings page. If the lights are strongly blue it means the connection is strong.