We at Sun Industries have spent Fifteen years serving you with all the equipment required for the mechanization of your construction works and one such type of machine is a Screed Vibrator. Our screed vibrator is designed with utmost precision to help you with a smooth finish of the concrete work.
WHAT IS A SCREED VIBRATOR?
Concrete screed vibrator are used in the construction industry. They are available in a variety of forms and sizes. It is primarily utilized in the construction of roads, trains, and buildings for concrete compression. It compacts newly poured concrete by removing air pockets and excess moisture. Its purpose is to secure the concrete in the molds. This is done to ensure correct concrete condensation and prevent product faults.A concrete screed is an instrument that levels and smooths the surface of freshly poured cement in a nutshell. A screed pushes big grain down and brings up the smooth layer to the top as it runs over fresh cement. They leave concrete surfaces clean, level, and devoid of any flaws.
Also Product:
WHY DO WE NEED A SCREED VIBRATOR?
A vibrating concrete screed is a piece of machinery that is used to smooth and level the concrete. It's a machine-driven equipment that allows workers to level and even fresh concrete while standing. The vibrating effect is caused by a motor linked to it. As a result, the worker's effort requirements are reduced. All he has to do now is pull the screed all across the surface. The rest is up to the machine, which will even it out. When constructing flatwork projects like roads, flooring, or parking lots, screeding is crucial. A contractor that doesn't take shortcuts will be able to create solid, attractive floors that would last for decades. The surface of the concrete is leveled when a screed travels over it.
Stand-up screeds are a useful item to have on hand for tiny pores and confined quarters. These mechanical screed vibrators are usually set up as a vibrating bar that can only be controlled by one person. While one operator pulls the screed, others labor in the concrete, scraping as near to grade as possible. Screeds for stand-up work are widely available and inexpensive.
Related Product:
Concrete Groove Cutter Machine
HOW DOES A SCREED VIBRATOR WORK?
A Screed Board Vibrator is a beam with a vibrating device attached to it. The vibrating unit, as well as the set of terminal roller assemblies, are usually located in the center of the beam. Vibrations are immediately conveyed to the concrete via the beam. The beam does not travel in any direction. Only the terminal rollers are used to move the screed forth and back. Near the outer edge of the cast, concrete forms are often employed. These forms keep the moist concrete confined until it has hardened to the point where it can balance by itself. When leveling or striking off the top of a freshly poured slab, most concrete screeds use these forms (or a screed pipe) as a guide. The screed is then rolled over the molds, resulting in a completed concrete slab that is precisely the right level. The majority of screeds vibrate or spin, moving bigger aggregate close beneath the surface. Finishers can work with smaller sand and cream (a thin slurry of cement) on the surface to create a smooth, professional looking finish.
TYPES OF SCREED VIBRATORS WE OFFER FOR SALE:
- SCREED VIBRATOR ELECTRIC TYPE-
The size of the Electric Screed Vibrator is 3.2 meters and is structured according to either C channel or square pipe as per requirement. This 80kg machine is powered by a 1HP 3 Phase motor which requires a power supply of 415 V AC or 50 Hz and is powerful enough to produce upto 2880 Rotations Per Minute. This tool is accessorized with two handles at the end of both its sides.
- SCREED VIBRATOR ENGINE TYPE-
The size of the Engine Screed Vibrator is actually 3.2 meters but it can be customized according to your requirement. It is structured in a C Channel type or a square pipe type and has a screed unit with two handles at the end of both its sides. This 80 kg machine is powered by 1.5 HP petrol kerosene engine or 1.5 HP greaves petrol engine or a 2 HP Honda petrol engine and produces upto 3000 Rotations Per Minute.
Our machinery is made with the finest quality raw materials and is simple to use, therefore it helps in cutting down the labor costs by requiring less skilled workers for its operation.
Now that you know that this screed vibrator can be both time saving and cost efficient way of increasing your output and performance, you should order a screed vibrator for your construction projects right away by contacting us.
Contact Us –
Add – No. 59, Dharnidhar Estate, Panna Estate Road, Rakhial Ahmedabad - 380 023, Gujarat, India.
Phone: +91 98250 39107
Website: https://www.sunind.in/
Email ID: info@sunind.in
